Fitting The Turbine Casing; Fig. 42: Fitting The Turbine Casing; Table 39: Tightening Torque (51007) - ABB TPS44-H Series Operation Manual

Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.14 Fitting the turbine casing
10.14

Fitting the turbine casing

Fig. 42: Fitting the turbine casing
Product
TPS44
TPS48
TPS52
Table 39: Tightening torque (51007)
1. Coat thread of studs (51006) with high-temperature grease.
2. Fit two swivel lifting eyes (01) on the turbine casing (51000). Secure lifting gear to the
swivel lifting eyes.
3. Turn the turbine casing (51000) by 180°.
4. If present: Fit the metal C-ring (51105).
5. Align turbine casing with marking and position on cartridge group.
6. Fit fastening strips (51002) with Verbus Ripp® washers (51003) and hexagon
nuts (51007). Observe tightening torque.
© Copyright 2021 ABB. All rights reserved.
Size Tightening torque [Nm]
M8
M8
M10
HZTL4037_EN
30 Nm
30 Nm
60 Nm
Rev.F May 2021