Soundbar/Receiver Settings - JVC LT-32CF600 Instruction Manual

Soundbar/Receiver Settings

Once you have setup your Soundbar or Receiver you will now see either Soundbar or Receiver in the Equipment Control menu.
This will show you all the settings for your device.
Highlight SOUNDBAR or RECEIVER and press SELECT. You will now see a list of
•
settings.
• Highlight the setting that you wish to adjust and press SELECT. See the table
below for information on each setting.
Setting Description
Set the amout the volume increases or decreases when you
Volume
ask Alexa to change the volume. The default increment is set
Increments
to 4.
Infrared
Changes the infrared options.
Options
Power Controls Adjusts the power ON/OFF settings for your soundbar.
Fire TV Inputs Change which inputs we switch for watching Fire TV.
Change If you would like to change the soundbar that's connected to
Soundbar
your TV select Change Soundbar.
Restore
Restores all the setting that you may have changed back to
Soundbar
factory defaults.
Defaults
Advanced
Adjust the power timing if your Soundbar does not switch ON/
Settings OFF.
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 53 JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 53
Settings Menu
Options
REWIND FAST FORWARD
• Press or
increase or decrease the increments.
OPTION
• Press to restore back to
default settings.
• IR Profile
• Timing
• Repetition
• IR Controller
• Power On Delay
• Power Control
• None
• Press REWIND or FAST FORWARD
increase or decrease the increments.
• Press OPTION to restore back to
default settings.
6
to
to
53
21/01/2021 12:32 21/01/2021 12:32