Picture Settings Table - JVC LT-32CF600 Instruction Manual

Picture Settings Table

The following table show all the available picture setting adjustment on your TV. Not all of these setting apply to all Inputs.
Your TV has some pre-set picture modes: STANDARD - VIVID - SPORT - FILM - GAME (HDMI). The default
Picture Mode
setting is STANDARD. You can also manually adjust each mode.
Auto Backlight Set the Auto backlight to ON - OFF. The default setting is ON.
Increases or decreases the brightness of the backlight from 0 - 100. Auto backlight must be OFF to adjust
Backlight
this setting.
Brightness
Increases or decreases the picture brightness from 0 - 100.
Contrast Increases or decreases the picture contrast from 0 - 100.
Colour Increases or decreases the picture colour from 0 - 100.
Sharpness Increases or decreases the picture sharpness from 0 - 20.
The colour temperature setting has 4 preset settings USER - COOL - STANDARD - WARM, when selected
Colour
each of these settings has individual adjustments. Red, Green and Blue gain can all be adjusted from -20
Temperature
to 20.
HDR On
Switches High Dynamic Range (HDR) on or off when HDR content is detected.
The picture format can be set to AUTOMATIC - SUPERZOOM - 4:3 - FILM EXPAND 14:9 - FILM EXPAND 16:9
Picture Format
- WIDE SCREEN - FULL. The default setting is FULL.
Advanced
Select to have more advanced adjustments to your TVs picture.
Picture Settings
Hue
Gamma
Colour Tuner
11 Point
White Balance
Correcting
Dynamic Noise
Reduction
MPEG Noise
Reduction
Adaptive Luma
Control
Local Contrast
Control
DI Film Mode
Blue Stretch
Game Mode
PC Mode
HDMI RGB Range
(HDMI input only)
Reset to Default Resets all setting to factory default settings.
JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 33 JVC 32' Amazon Fire LED Smart HD TV LT-32CF600 Manual.indd 33
Increases or decreases the picture hue from -50 (reds) to 50 (greens).
Choose from Middle, Bright (standard) or Dark (film). Highlight your desired setting
then press SELECT.
Colour Tuner can be switched on and off by selecting ENABLE ON or OFF. Then
you have 5 separate setting that can be individually adjusted. HUE - SATURATION -
BRIGHTNESS - OFFSET - GAIN.
11 Point White Balance Correcting can be switched on and off by selecting ENABLE
ON or OFF. Then you have 4 separate setting that can be individually adjusted. GAIN
- RED - GREEN - BLUE. Gain can be adjusted from 5% to 100%, highlight your desired
setting then press SELECT. Red, Green and Blue can be adjusted from 0 - 100, the
default setting is 50.
Dynamic Noise Reduction has 5 different setting OFF - LOW - MEDIUM - STRONG
- AUTO. The default setting is MEDIUM. Highlight your desired setting then press
SELECT.
MPEG Noise Reduction has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is MEDIUM. Highlight your desired setting then press SELECT.
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - STRONG. The
default setting is STRONG. Highlight your desired setting then press SELECT.
Adaptive Luma Control has 4 different setting OFF - LOW - MEDIUM - HIGH. The
default setting is STRONG. Highlight your desired setting then press SELECT.
DI Film mode has 2 setting AUTO and OFF. The default setting is OFF. Highlight your
desired setting then press SELECT.
Blue Stretch can be switched ON or OFF.
Game Mode can be switched ON or OFF.
PC Mode can be switched ON or OFF.
HDMI RGB Range has 3 different settings AUTO - FULL - LIMIT. The default setting is
AUTO. Highlight your desired setting then press SELECT.
Customising TV Settings
5
33
21/01/2021 12:30 21/01/2021 12:30