Applying Power - Emerson SOLAHD STV25K Series Manual

1.13 Applying Power

Apply power to the unit and ensure status indications are normal. Under normal conditions, the green LED
is illuminated.
If the green LED is not illuminated, check all connections and ensure reliable and proper voltages are supplied
to the unit.
For further assistance, please contact SolaHD Technical Support at 1-800-377-4384. You can also e-mail us at
solahd.technicalservices@emerson.com.
Table 1: Voltage Ratings & Power Source Configurations
Model: STV25K10S
Nominal Voltage (50/60 Hz): 120 V ac
System Configuration: Single-phase, 2W + G
Model: STV25K24S
Nominal Voltage (50/60 Hz): 240 V ac
System Configuration: Single-phase, 2W + G
STV25K Series
Source Configuration:
Source Configuration:
Page: 5