Access Point; I Can't Communicate With The System; The Wi-Fi Network Has The Wrong Name - IntelligentAg RECON Troubleshooting Manual

I can't communicate with the system.

1. Verify that you are connected to the IASBlockage Wi-Fi network in the iPad's Settings
page.
NOTE: If you are using two tractors in the same field with separate sets of ECUs,
connect the ECUs named WB2 to the IASNetwork2 network.
2. Check for app updates in the App Store. You must be connected to a home Wi-Fi
network (not the IASBlockage or IASNetwork2 network). If an update is available,
download it.
3. Verify that you have power to your ECUs and that the red LED is blinking about once per
second.
4. Verify that your access point has power and that all LEDs except LAN or LAN1 are on.
5. Check for possible Wi-Fi interference. "Forget" any networks that the iPad has been
connected to in the past that appear in the My Networks network list.
6. If you have any of the following devices connected, disconnect them:
Wireless camera (disconnect both the cab display and camera on implement)
•
Wi-Fi booster/relay station
•
2-way radio
•
7. Go to a "quiet" location. If you're in the farmyard, drive out to a field away from the yard's
electrical interference and any other interference.
8. Shut off all other electronics except for your blockage and flow monitor components.

The Wi-Fi Network has the wrong name.

Intelligent Ag offers two unique Wi-Fi networks for the WBFM system.
IASBlockage: This is the most common network name. It is referred to as SSID 1. It
•
communicates with ECUs that have stickers with a white background on them and the
serial number sequence will utilize the following format: WBM-XXXX.
IASNetwork2: This is used if you have more than one WBFM system. It is referred to as
•
SSID 2. It communicates with ECUs that have stickers with a black background on them
and the serial number sequence will utilize the following format: WB2-XXXX.
If you have an access point, refer to the instructions in the
to change the network name.
If you have a gateway, contact Intelligent Ag to change the network name.
600820-000012, rev 2.1
Recon Wireless Blockage and Flow Monitor (WBFM) Troubleshooting Guide

Access Point

network renaming information notice
Page 7 of 31