Copy Track (Make A Compilation Cd) - Alesis CD Twin Reference Manual

3.2 COPY TRACK (Make a Compilation CD)

This function allows you to make a compilation audio CD from a single
CD, or multiple source CDs.
I. Insert the source audio CD into the Reader CD-ROM drive and insert
a blank disc into the Writer CD-RW drive.
II. From the main menu, press the << or >> buttons until
[2. Copy Track] is displayed on the LCD and press the START button.
III. Move the cursor under the track that you want to add to the
compilation CD by using the << or >> buttons. After selecting the
track, a letter will be displayed above the track number to denote that this
specific track has been chosen. If you have speakers or headphones
connected to the earphone jack, you will hear the audio of the selected
track. If you would like to cancel a selected track, press the START
button again while the cursor is underneath the track number.
NOTE: If you press the CANCEL button, you will exit [track
selection mode] and return to the main menu.
NOTE: The letters above each selected track represent the order in
which they will be burned onto the compilation CD.
IV. After you are finished selecting all of the tracks for your new
compilation CD, press the >> button until the cursor is under the [OK]
option, all the way to the right. Then simply press the START button and
the CD Twin will copy the selected tracks one by one.
f a
13 14 15 16
CD Twin
2. Copy Track
e f a i b
1 2 3 4 5 6 7 8
c
OK
8
Track 11 06:59
[14.10] 04:43