Table of Contents
Advertisement
1.5 Operating statement
1.5.1 CD to CD BACKUP
i.
Turn on the system, you will see the LCD show the function as below:
ii.
Put in source disc into "R" reader CD-ROM, and put in blank disc into "W" writer
CD-RW
iii.
Press START key to confirm the execution and start copying
You can see the copying status and time elapsed from the LCD screen as below:
iv.
When finish copying, the "W" CD-RW will automatically eject.
v.
You can put in another blank disc to continue copying. Or you can press CANCEL
to go back to the main menu
1.5.2 COPY TRACK
This function allows you to make your personal audio CD from multiple source CDs.
Put source disc into "R" CD-ROM, and blank disc into "W".
i.
Move cursor >> or << to Select 2. Copy Track function on the LCD and press
ii.
START key.
Move cursor << and >> on the track you would like and press START this
iii.
track. As you press START on each track, a letter will come up above the track
number to denote that the specific track has been chosen. In the mean time, if a
speaker has been already plugged into the earphone jack, you will hear the music of
the selected track. If you would like to cancel the selection, press START again to
delete the selection. And move cursor >> to continue your next selection.
Note: If you press Cancel key, you will stop the track selection and go back to main
menu.
Note: You can change the sequence in different order by selecting the tracks
randomly.
Function
Total disc length
Data length processed
Track selected
Track number
14
Advertisement
Table of Contents
