System Functions; Erase Disc; Rawcopy Disc - Alesis CD Twin Reference Manual

3.5 SYSTEM FUNCTIONS

3.5.1 Erase Disc

The [Erase Disc] function may only be used to erase a CD-RW disc that is
installed in the Writer drive location.
I. Select [5. System] from the main menu and press START.
II. Insert the CD-RW disc that you would like to erase into the Writer
CD-RW drive.
III. Select [5.1 Erase Disc] and press START.
IV. The LCD will show the following during the [Erase Disc] procedure.
V. Once the [Erase Disc] function has completed, either insert
another disc to be erased or press the CANCEL button to return
to the main menu.

3.5.2 RAWCOPY Disc

Select this function if you want to copy an entire disc in one easy
step. The [RAWCOPY DISC] function will make a mirror
image of the source disc.
When the RAW reading mode is enabled, all tracks will be read
with a block length of 2352. If this option is not selected, then
all Mode1 and Mode2 data tracks will be read with a block
length of 2048 and 2336 respectively.
NOTE: This option has no effect on audio or CD+G tracks.
Just insert the source disc into the Reader drive and insert a
blank disc into the Writer drive, select [RAWCOPY DISC] and
press START.
5. System
5.1 Erase Disc
Erasing ...
00:06
11