Epson TRUME ME25 User Manual page 26

Table of Contents

Advertisement

ME25/TR-ME2
User's Guide
Note:
❏ Check time difference in
When daylight saving time
❏ When correcting for the time difference, pay attention to AM/PM and the date.
❏ Turn the crown gently.
❏ The other hands may move a little when you adjust the hour hand. This is not a malfunction.
❏ If the hour hand passes 0:00 A.M. when adjusting the time to between 9:00 P.M. and 0:00 A.M. in time
distance correction by turning the crown right (minus time difference correction), turn it back to 8:00 P.M.
once and then set the time.
* Daylight saving time (DST) is a system that advances the standard time by 1 hour (or another specific time)
during long periods of daylight, normally during summer. Also known as summer time. This system is used in
approximately 80 countries around the world, mainly in Europe and the United States, in countries at a high
latitude with long daylight hours in the summer. The way DST is implemented may vary depending on the
circumstances of the country or region. Also, the period during which this is applied varies by country/region.
Adjusting the Time/Calendar (Date)
"Cities and Time Differences" on page
*
is in effect, advance the time by 1 hour from the time difference in the table.
26
27.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr-me2

Table of Contents