Amphenol Kaye Validator AVS Standard Operating Procedure page 8

Document #:
Click the Qualification tab.
Click the Modify button.
The Start/Stop Conditions screen appears.
Set the Start/Stop Conditions as necessary and click OK.
Set the Data Storage File Rate and Kaye Validator Printer Rate as necessary.
Set the Output Relay to actuate based on "event" if necessary.
9. Save the setup file.
Click Save.
The Save Setup File screen appears.
Enter User Id and password.
Click OK.
The Setup tile screen appears.
10. Click home to return to the Home page.
Standard Operating Procedure for the Kaye Validator® ® ® ® AVS System
Revision: A
© 2015 Amphenol Thermometrics, Inc
Standard Operating Procedure
PAGE: 8 of 16