Head Restraints - Mercedes-Benz 300 SDL turbo 126 D Owner's Manual

86

Head Restraints

Removing front seat head restraints:
Bring the head restraint to its highest
position.
Depress release button (1) under the
seatback covering material and pull
head restraint up sharply, holding it by
the left head restraint post (viewed in
driving direction). Then pull out head
restraint completely with both hands.
The release button (1) is located
below the left head restraint post on
both front seats.
Installing front seat head restraints:
Insert the head restraint and push it
down to the stop.
Check if the highest position can be
reached by pushing the switch up for
approximately 5 seconds (see
page 29).
Adjust head restraint to the desired
position.
Removing rear seat head restraints:
Pull head restraint up until detent is
felt. Then pull it out sharply using both
hands.
Installing rear seat head restraints:
Insert the head restraint, push it down
and adjust as desired.
Warning!
For your protection, drive only with
properly positioned head restraints.
Do not drive the vehicle without the
head restraints. Head restraints are
intended to help reduce injuries
during an accident.
For positioning of head restraints
refer to pages 29 and 30.