Important!
Prior to operating the vehicle, the
driver should adjust the seat height
for proper vision as well as fore/aft
placement and seat back angle to
insure adequate control, reach, oper
ation, and comfort. The head restraint
should also be adjusted for proper
height.
Both the inside and outside rearview
mirrors should be adjusted for ade
quate rearward vision. Fasten seat
belts. Infants and small children
should be seated in a properly
secured restraint system that com
plies with Federal Motor Vehicle
Safety Standard 213.
All seat, head restraint, and rearview
mirror adjustments as well as fasten
ing of seat belts should be done
before the vehicle is put into motion.
30
Orthopedic Seat Backrest
Some models may be equipped with
orthopedic seats. These seats have
an inflatable air cushion built into the
backrest to provide additional lumbar
support. The amount of cushion
height and curvature may be adjusted
after turning the key to steering lock
position 1 or 2.
The inflation pressure of the air cush
ion can be varied between position
" 0" = without pressure, and position
" 4" = maximum pressure, by chang
ing the pressure regulator (1) setting.
In addition, the cushion height may be
changed to five different settings
between position " A " = lowest set
ting, and " E" = highest setting, by
varying the height regulator (2)
adjustment.
If a driving trip is temporarily inter
rupted, the last cushion setting is
retained in memory, and automatically
adjusts the cushion to this setting
when the trip is continued.