Advertisement
Tricycle Assembly Procedure
screw M4 × 10mm
nut M4
Step 8: attach the middle bracket to the front bracket
tracking
screw M4 × 10mm
sensor
nut M4
L plate
Step 9: install the tracking sensor
screw M4 × 10mm
nut M4
The waist-round hole is used to
adjust the distance between the
tracking sensor probe and ground.
Waist-round hole is commonly used
to adjust distance in engineering.
For the tracking sensor to perform well,
please make sure the sensor is installed
parallel to the ground. The distance
between the tracking sensor probe and
ground is recommended to be 8-10
mm.
8mm~10mm
Ground
Step 10: install the tracking senor assembly
Tricycle Assembly Procedure
screw M4 × 16mm
ultrasonic
sensor
nut M4
Step 11: install the ultrasonic sensor
Advertisement
