Alesis 1622 Reference Manual page 14

Submaster
Assign Switch
(Channel)
Sub Outs 1 -2
From
Mixdown
Deck
Tape/Line
Monitor
Switch
To
Headphone
Jack
Now, using the above Signal Flow Diagram, let's see what happens to a vocal as it goes from the
input of a channel all the way to tape.
Starting at the top of the diagram, the signal from the mic enters the console through the
channel's XLR Input jack. (As you'll remember, channels 1-8 have XLR jacks in addition to their
unbalanced line ins. It is important to note that anything plugged into the line in jacks on
Input
Input Trim
EQ Section
Aux Sends 1 - 2
(Pre-Fader Sends)
Channel Insert
Mute
Input Fader
Aux Sends 3 - 6
(Post - Fader Sends)
Direct Out
Left/Right Pan
(Channels 1 - 8)
Control
Master Assign Switch (Channel)
Sub Inserts 1 - 2
Sub Faders 1 - 2
Submaster to
Master Assign
Switch
Control
Room
Monitor
Volume
Monitor
Outputs
(L - R)
Master Outs (L - R)
11
Solo
to Solo Buss
Aux Returns 1 - 4
(Pannable)
Aux Returns 5 - 8
(Hardwired L - R)
Master Inserts (L - R)
Master Faders (L - R)