Μcom/Dsp Version Display Mode - Denon AVR-X4000 Service Manual

1. µcom/DSP Version display mode
1.1. Operation specifications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "ON/STANDBY" button to turn on the power while pressing the "SETUP" and "OPTION" buttons.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
When the version is displayed on the FL Display, the version list is also displayed on the GUI.
b
1.2. Display Order
Error information(Refer to 1.3. Error display) → q Model destination information → w Firmware Package Version
→ e Main µ-com/MAIN FBL(1st Boot Loader) Version → r Sub µ-com/Sub FBL → t DSP version → y Audio PLD
→ u GUI SFLASH → i Ethernet(DM860A) 1st Boot Loader, Hardware ID
→ o Ethernet(DM860A) 2nd Boot Loader → Q0 Ethernet(DM860A) IMAGE
→ Q1 Ethernet(DM860A)MAC ADDRESS information → Q2 HD RADIO SDK/HD RADIO BBP(AVR-X4000E3 only)
→ Q3 MultEQ Pro APP(Displayed when Audyssey Pro is complete)
→ Q4 MultEQ Pro ICL(Displayed when Audyssey Pro is complete
q Model destination information :
Upper
A V R - X 4 0 0 0
Lower
S / N .
w Firmware Package Version :
Upper
F i r m .
Lower
e Main µ-com & MAIN FBL version :
Upper
M a i n
Lower
M a i n
r Sub µ-com & Sub FBL :
Upper
S u b
Lower
S u b
t DSP ROM :
Upper
D S P 1
Lower
D S P 2
y Audio PLD :
Upper
A u d i o
Lower
u GUI SFLASH :
Upper
G U I
Lower
E 3
* * * * * * * * * *
P a c k a g e
V e r . : * * * *
: * * . * *
F B L : * * . * *
: * * . * *
F B L : * * . * *
: * * . * *
: * * . * *
P L D : * * . * *
: * * * * * * * *
21