Eye Protection Safety Instructions
• For your own protection please read and thoroughly understand all safety
instructions before use
• Keep these instructions with the product for future reference. Ensure all people
who use this product are fully acquainted with these safety instructions
Markings
• The eye and face protection may be marked on both frame and lens
• If markings are not the same, the lowest marking must be used as the rating
Frames
EN166 = Number of European Standard
F = Low energy impact against high speed particles
B = High energy impact against high speed particles
CE Mark
Lens
Scale number for colour lens
F = Low energy impact against high speed particles
B = High energy impact against high speed particles
CE Mark
Instructions for Use
• This eye protection is designed for your personal safety and must be worn for
the duration of exposure to hazards.
• For adult use only.
Instructions de securite concernant la protection
oculaire
Pour votre propre protection, veuillez lire toutes les instructions de sécurité
et les assimiler complètement avant utilisation. Rangez ces consignes avec
l'outil, pour référence ultérieure. Assurez-vous que toutes les personnes qui
utilisent cet outil ont attentivement pris connaissance de ces instructions.
Marques distinctives
• La protection oculaire et faciale doit être marqués à la fois su le cadre et sur
le verre.
• Si les marques diffèrent, la marque la plus basse doit servir d'échelle.
Cadre
EN166 = Numéro de standard européen.
S = robustesse améliorée
B = impact de moyenne énergie contre les particules à grande vitesse
A = impact de haute énergie contre les particules à grande vitesse
Marque CE.
Verre
S = robustesse améliorée
B = impact de moyenne énergie contre les particules à grande vitesse
A=impact de haute énergie contre les particules à grande vitesse
Marque CE.
Instructions d'utilisation
• La protection oculaire est conçue pour votre sécurité personnelle et doit être
portée durant toute la durée d'exposition aux dangers.
• A l'usage des adultes uniquement.
Schutzbrillen Sicherheitsanweisung
Lesen Sie vor dem Gebrauch alle Sicherheitshinweise aufmerksam durch. Sie
dienen zu Ihrem persönlichen Schutz. Für spätere Nachschlagezwecke sollten Sie
diese Anweisungen zusammen mit dem Produkt aufbewahren. Stellen Sie sicher,
dass die vorliegenden Sicherheitsanweisungen allen Personen bekannt sind, die
dieses Produkt verwenden.
Kennzeichnungen
• Der Augen- und Gesichtsschutz ist am Gestell sowie am Glas gekennzeichnet.
• Wenn die Kennzeichnungen nicht übereinstimmen, gilt die niedrigste
Kennzeichnung als Nennwert.
Gestell
EN166 = Kennnummer der Euronorm.
F = Niedrige Energie beim Aufprall auf Hochgeschwindigkeitspartikel
B = Hohe Energie beim Aufprall auf Hochgeschwindigkeitspartikel.
CE-Prüfzeichen.
Glas
Tönungsstufe bei getönten Gläsern.
F = Niedrige Energie beim Aufprall auf Hochgeschwindigkeitspartikel
B = Hohe Energie beim Aufprall auf Hochgeschwindigkeitspartikel.
CE-Prüfzeichen.
Gebrauchshinweise
• Dieser Augenschutz ist für Ihre eigene Sicherheit vorgesehen und muss über
die gesamte Gefährdungsdauer getragen werden.
• Nur für Erwachsene.
®
Eye Wear Safety Instructions
Storage and Maintenance
• Eye protection must be stored in a clean and dry environment.
• Do not clean with abrasive materials. Clean with warm soapy water and dry with
soft cloth.
Caution
• This product is designed for eye protection but is not unbreakable
• Never alter or modify this product
• A damaged lens reduces vision and protection and should be replaced
immediately
• It is the responsibility of the user to acquaint themselves with the hazards to
be encountered and select the correct level of eye protection for use in
the hazardous area
• The materials which come into contact with skin may cause allergic reactions to
susceptible individuals. If a reaction occurs, leave the area, remove the goggles
and seek medical advice
• Failure to follow these instructions and warnings on the use of this item during
all times of exposure can reduce its effectiveness and could result in illness or
disability.
General Safety instructions
Clean the work area
• Accidents can occur where benches and work areas are cluttered or dirty.
• Floors must be kept clear and avoid working where the floor is slippery.
• If working outdoors, make yourself aware of all potential slip and trip hazards.
Children and pets
• Children and pets should always be kept at a safe distance from the work area.
• Lock tools away out of reach of children.
Entretien et stockage
• La protection oculaire doit être rangée dans un environnement propre et sec.
• Ne la nettoyez pas avec des matériaux abrasifs. Nettoyez avec de l'eau tiède et
savonneuse et séchez avec un chiffon doux.
Avertissement
• Ce produit est conçu pour la protection oculaire mais n'est pas incassable
• N'altérez ni ne modifiez jamais ce produit
• Un verre endommagé réduit la vision et devrait être changé immédiatement.
• Il est de la responsabilité de l'utilisateur de se tenir informés des dangers
auxquels il peut être exposé et de choisir le niveau de protection oculaire correct
à utiliser dans la zone dangereuse.
• Les matériaux qui entrent en contact avec la peau peuvent causer des allergies
aux personnes sensibles. Si une réaction se produit, sortez de la zone, enlevez
vos lunettes et prenez l'avis d'un médecin.
• Le non respect de ces instructions et mises en gardes quant à l'utilisation de ce
produit durant toute la durée de l'exposition peut réduire son efficacité et
résulter en une maladie ou un handicap.
Consignes de sécurité générales
Nettoyez la zone de travail
• Des accidents peuvent se produire quand les bancs et zones de travail sont
encombrés ou sales. Le sol doit être dégagé. Evitez de travailler sur un sol glis
sant.
• En cas de travail à l'extérieur, appréciez les risques de glissement ou de chute
avant d'utiliser l'outil.
Enfants et animaux
• Maintenez toujours une distance de sécurité entre les enfants ou les animaux et
votre zone de travail.
• Rangez les outils dans un lieu sûr fermé à clé, hors de portée des enfants.
Lagerung und Instandhaltung
• Der Augenschutz muss in einer sauberen und trockenen Umgebung gelagert
werden.
• Nicht mit Scheuermitteln reinigen.
• Mit warmer Seifenlauge abwaschen und mit einem weichen Tuch abtrocknen.
Vorsicht
• Dieser Artikel ist zwar für den Schutz der Augen vorgesehen, jedoch nicht
unzerstörbar.
• Der Artikel darf in keiner Weise verändert oder modifiziert werden.
• Beschädigte Gläser beeinträchtigen die Sicht und den Schutz und sollten
unverzüglich ausgewechselt werden.
• Es liegt in der Verantwortung des Benutzers, die zu erwartenden Gefahren
festzustellen und einen angemessenen Augenschutz für den Gefahrbereich
auszuwählen.
• Das Material, das mit der Haut in Kontakt tritt, kann bei anfälligen Personen
allergische Reaktionen auslösen. Bei einer allergischen Reaktion sofort den
Bereich verlassen, die Brille abnehmen und einen Arzt rufen.
• Die Missachtung dieser Anweisungen und Warnhinweise zur Verwendung des
Artikels über den gesamten Gefährdungszeitraum hinweg führt zu einer Verringerung
der effektiven Nutzung des Artikels und kann Krankheiten oder Schädigungen
verursachen.
Allgemeine Sicherheitshinweise
Reinigen Sie den Arbeitsbereich
• Unordnung oder Schmutz auf Werkbänken und im Arbeitsbereich können zu Unfällen
führen. Fußböden müssen frei gehalten werden. Vermeiden Sie das Arbeiten auf
rutschigem Untergrund.
• Denken Sie beim Arbeiten im Freien an die möglichen Rutsch- und Stolpergefahren.
Kinder und Haustiere
• Kinder und Haustiere müssen einen sicheren Abstand zum Arbeitsbereich einhalten.
• Schließen Sie das Werkzeug an einem Ort ein, zu dem Kinder keinen Zugang haben.
Wear suitable clothing and footwear
• This product will only provide eye protection. If necessary select other safety wear
appropriate for the task.
• Do not wear loose fitting clothing, jewellery, and tie long hair back.
• Shoes must be non slip.
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: Silverline Tools
Declares that
Identification code: 140903
Description: Safety Goggles
Conforms to the following directives and standards:
• PPE Directive 89/686/CEE
• EN166:2001
Notified body: Inspec
Notified body number: 0194
The technical documentation is kept by: Silverline Tools
Date: 08/03/16
Signed:
Mr Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Central House, Church Street, Yeovil, Somerset BA20 1HH, United Kingdom.
Porter des chaussures et des vêtements adaptés.
• Ce produit ne fournit qu'une protection oculaire. Si nécessaire, sélectionnez
d'autres équipements de sécurité appropriés à la tâche a effectuer.
• Ne portez pas ni vêtements amples, ni colliers ni bijoux et attachez les cheveux
longs dans le dos.
• Les chaussures doivent être anti-dérapantes.
Déclaration de conformité CE
Le soussigné : Mr Darrell Morris
Autorisé par : Silverline Tools
Déclare que le produit :
Code d'identification : 140903
Description : Lunettes de protection
Est conforme aux directives suivantes :
• Directive relative aux équipements de protection individuelle 89/686/CEE
• EN166:2001
Organisme notifié : Inspec
Numéro d'identification de l'organisme notifié : 0194
La documentation technique est conservée par : Silverline Tools
Date : 08/03/16
Signature :
Mr Darrell Morris
Directeur général
Nom et adresse du fabricant ou de son représentant agréé :
Powerbox International Limited, numéro d'entreprise 06897059. Adresse légale :
Central House, Church Street, Yeovil, Somerset BA20 1HH, Royaume-Uni.
Tragen Sie geeignete Bekleidung und geeignetes Schuhwerk
• Dieser Artikel sorgt lediglich für den Schutz der Augen. Gegebenenfalls ist weitere
Schutzklei dung für die jeweilige Arbeit hinzuzuziehen
• Keine weite Kleidung und Schmuck tragen und langes Haar zu einem Zopf binden.
• Das Schuhwerk muss rutschfest sein.
EU-Konformitätserklärung
Name des Unterzeichners: Mr. Darrell Morris
Bevollmächtigt durch: Silverline Tools
Erklärt hiermit, dass das Produkt:
Ident.-Nr.: 140903
Produktbeschreibung: Schutzbrille
Den folgenden Richtlinien und Normen entspricht:
• PSA-Richtlinie 89/686/EWG
• EN166:2001
Benannte Stelle: Inspec
Kennnummer der benannten Stelle: 0194
Techn. Unterlagen bei: Silverline Tools
Datum: 08.03.2016
Unterzeichnet von:
Mr. Darrell Morris
Geschäftsführender Direktor
Name und Anschrift des Herstellers:
Powerbox International Limited, Handelsregisternummer 06897059. Eingetragene
Anschrift: Central House, Church Street, Yeovil, Somerset BA20 1HH, Großbritannien
www.silverlinetools.com
140903
Need help?
Do you have a question about the 140903 and is the answer not in the manual?
Questions and answers