Konica Minolta PF-122 Service Manual page 24

12. Perform another test print and check the reference deviation.
13. Repeat the adjustment until the reference line falls within the specified range.
6. Touch the 3rd Drawer key.
7. Press the Start key.
4348P016CA
8. Measure the width of printed reference line B.
Specification: 11.3 mm±1.5 mm
9. If width B falls within the specified range, finish
B
the adjustment procedure.
If outside the specified range, perform the adjust-
ment below.
4348U054AA
10. Touch END to display the Registration (FD)
screen.
4348D519CA
11. Press the Clear key and use the 10-Key Pad to
set the value.
✽ If width B is wider than the specified range, enter a
negative value.
✽ If width B is narrower than the specified range,
enter a positive value.
Adjustment range: + 4.0 max. and -4.0 min.
4349D519CA
Use the ✽ key to switch between + and -.
D-14