Technical Data; Ec Declaration Of Conformity - DeWalt DW754 Instructions Manual

EN GLI SH
TOOL GRINDING AND HONING MACHINE
DW754
Congratulations!
You have chosen a D WALT power tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
(UK & Ireland only)
Type
Rated current
Motor power (input)
Motor power (output)
No-load speed min
Max. wheel diameter mm
Max. wheel width mm
Wheel bore mm
Weight
Vibration total values (triax vector sum) determined according to
EN 61029:
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L ( sound power) dB(A)
WA
K (sound power
WA
uncertainty) dB(A)
NOTE: The figures are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of the workforce include the characteristics of the
workroom and the other sources of noise, etc.
i.e. the number of machines and other adjacent
processes. Also, the permissible exposure level
can vary from country to country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
Fuses:
Europe 230 V tools
400 V tools
24
Defi nitions: Safety Guidelines
The definitions below describe the level of the
severity for each signal word. Please read the
manual and pay attention to these symbols.
DW754
V 230
V 230/115
2
A 1.86
W 415
W 300
-1
2,750
125
25
20
kg 9.3
85
EC-Declaration of Conformity
3
98
MACHINERY DIRECTIVE
3
DW754
D
E
under "technical data" are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-4.
These products also comply with Directive
2004/108/EC. For more information, please contact
D
E
manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
E
10 Amperes, mains
16 Amperes, per phase
DANGER: indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
WARNING: indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT declares that these products, described
WALT at the address or refer to the back of the
WALT