Safety Instructions - Caraudio-Systems C2C-M200 Instruction Manual

Table of Contents

Advertisement

Safety Instructions:

1. Read through mounting guidelines:
Please read through all safety instructions and handling directions intently before installation
and start up of the device.
2. Keep mounting guidelines:
Keep the instruction manual and safety instructions for potential further reference.
3. Caution advises:
Please follow all caution advises contained in the mounting guidelines.
4. Water and humidity:
The device should not be operated near water or near a humidity source.
5. Warmness / heat:
The device should not be set up in direct proximity of heat sources (e. g. power amplifier).
6. Connection / electric power supply:
Use the device only at a +12 volt vehicle electrical system. Make sure to have a proper
ground.
7. Intrusion of objects or liquids:
Please make sure that no objects or liquids can intrude the interior of the device! (Danger of
short circuit!)
8. Repairs:
You should call on qualified personnel, if:
 a plug or a connector have been damaged
 cables are damaged
 objects have fallen into the device or liquids have intruded it
 the product has been exposed to humidity
 the device doesn't function normally or if
significant changes in the operating performance can be observed
 the product/casing has been damaged.
9. Operation:
Start no operation that is likely to distract you for a prolonged time from road traffic or traffic
related events – RISK OF ACCIDENT!!!
10. Warranty:
The warranty will cease in case that:
 you open the device or the casing
 you carry out repairs single handed
 you use the device improperly
 the device shows damages caused by external forces or mischievous destructions.
We assume no liability for damages to the vehicle or to people.

Advertisement

Table of Contents
loading

Table of Contents