TOSHIBA
23-4: Setting of UC time (TUG)
24-2: Setting of OCG current (IO,,)
24-3: Setting of OCG time (TO&
25-2: Setting of allowable locking time in cold condition (TSC)
25-3: Starting current (1st)
25-4: Starting time (Tst)
Set to 1 s.
To prevent undesired operation, Set to 10
Set to 0.1 s.
Given value (Consult motor manufacturer>
See motor data.
Or after one start, read screen P4. (See page 50.4-2.)
Varies per application. (motor,
calculate based on motor torque and load .
Or after one start, read screen P4. (See page 50.4-4.)
of starter)