Advertisement
TOSHIBA
Procedure for loading the backed-up settings of the memory card into the
Register the MACH. ID and PASS ID of the S2E21.
1.
(MACH. ID and PASS ID must be the same as those when the settings were
backed up in the memory card.)
(See 5.3.3. 5.4.)
Insert the memory card into the S2E21.
2.
(See 5.11.3 (3j.j
3.
Load the backed-up contents from the memory card into the
The contents of settings backed up by the memory card are those stored by the
above backup procedure.
the contents of the memory card do not automatically change.
to perform the store operation again.
Prior to the loading of the backed-up settings, comparison is made of the
MACH. ID and PASS ID between the memory card and the
numbers do not agree, the backed-up settings will not be loaded into the
5.11.2 Memory Card As Information Media
The memory card may be used as information media for the monitor system including
personal computers and for the S2E21.
For detail, see the manual for the monitor system.
After this, when the settings of the
You are reguired
When these ID
Advertisement
