Set Up - Image Industries CD 110 Operation Manual

Section 2
For a 110V configuration the jumpers connect terminals H1 and H3 and H2 and H4.
Figure 1
For a 220V configuration only one jumper is used between terminals H2 and H3.
Figure 2
If connecting as a 220V unit, be sure and place the extra jumper in a safe place. You will need it to reconnect the
unit to 110V.Replace the cover and reinstall the 8 #10 hex head screws.
Installation
110 V
110 V
H4 H3 H2 H1
220 V
H4 H3 H2 H1

& Set Up