Cleaning And Maintenance - Beaba UM 800 Instructions Manual

CLEANING AND MAINTENANCE

- It is recommended to clean the product once a week.
- Always unplug the humidifier before cleaning it.
- Do not use soap, detergents, abrasive or alkaline products.
- Do not put the humidifier's base in water and do not place it under
running water.
- To clean the humidifier and remove limescale: put 50% of water and
50% of white vinegar in the reservoir. Leave for 5 hours and rinse several
times (at least 3 times).
- Use a damp cloth or sponge to clean the product's exterior. Dry it with
a dry cloth.
- Clean the humidifier's base with a soft cloth only.
- Leave the device to dry before reusing it.
The logo on this product representing a crossed-out wheeled bin indicates
that the product must not be disposed of along with standard household
waste. In order to avoid damage to the environment or humans, please
separate this product from other waste in order to ensure that it is recycled
in a manner which is safe for the environment. For further details about
existing collection sites, please contact the local administrative services
or the retailer where you purchased this product.
The humidifier does not work.
The light indicator is on but
there is no water vapour or
there is too little water vapour.
White powder appears on the
exterior of the humidifier.
The water vapour has an
unpleasant smell.
BEABA_notice humidificateur.indd 14
Malfunctions Possible solutions
Ensure that it is correctly plugged in and that
the button is in the ON position and that the
light indicator is on.
Check that nothing is blocking the water
vapour outlet.
Check that there is water in the reservoir.
The water you use may be too mineralised.
Change the water.
Clean the water reservoir, dry it well and fill
it again.
D
TECH
TECH
Mode
Nenns
Leistu
Fassu
SICH
ACHT
• Dies
und
dah
Sch
una
• Dies
alte
wer
Ger
vers
• Dies
mit
unz
übe
ihre
Gef
05/11/2015 10:35