Beaba UM 800 Instructions Manual page 13

INSTRUCTIONS
iler or
Please read the instructions below before switching on your
nd of
humidifier.
must
To fill the water reservoir:
aph.
- Remove the "adjustable vapour nozzle". (a)
ed to
- Lift out the water reservoir and turn it upside down. (g)
ged it
- Open the water reservoir lid (unscrew the lid). (f)
- Fill the reservoir with wate. (g)
spose
- Close the lid of the water reservoir. (f)
of the
- Turn the water reservoir upright and place it on the humidifier base.
- Insert the "adjustable vapour nozzle". (a)
ets or
To use the humidifier:
- Plug in the device using the power cable.
- Turn the button for controlling the vapour to the desired position:
anual,
adjust the intensity of the humidifier to the desired level:
• "Min" for low intensity water vapour. (e)
• "Max" for high intensity water vapour.
- After a few seconds, a mist will start to appear from the adjustable
vapour nozzle
- Switch off the humidifier after use.
To empty the humidifier:
- Switch off the humidifier, turn the button to the left, and make sure
that the light indicator is not on. (d)
- Unplug the device.
- Remove the water reservoir from the product base. (g)
- Empty the water in the reservoir.
- Wipe off any droplets on the product with a soft cloth.
BEABA_notice humidificateur.indd 13 05/11/2015 10:35