EVA Logik WF96SD Quick Start Manual

Outdoor Dimmer Plug
• WF96SD •
Meet your new smart Plug !
IMPORTANT!
This unit is suitable for outdoor use in damp locations.
Do not expose to rain or immerse in water.
(A) Manual / Program button
A
B
C
For outdoor use
IP65 Rated
QR code
Note:
Your device needs to be installed in the network coverage of your home router.
1. Please scan the QR code to download the application "Smart Life".
2. If you cannot download Smart Life app, please search "Smart Life"
on Google Play (for Android phone) or Apple Store (for iOS phone) to
download.
please follow the instructions below to set up your smart switch.
Wi-Fi
Plug x 1
Screw x 1
Plastic Anchor x 1
Single press: manually turn on/off
your device.
Hold: adjust brightness.
RGB LED indicator
Sky-blue: Network configuration mode
Blue: Light status indicator
Red: Network Failure/Overloading Warning
Purple: AP Network configuration mode
(B) Dimmer Outlet
This is your smart outlet that will be
included in your smart home.
(C) Protector
Insert in connector when not in use.
Smart Life
,
Introduction
The EVA LOGIK WF96SD is a 400W MAX Loading smart dimmer plug
designed for use seasonal and landscape lighting, porch light, and
other indoor and outdoor plug-in small appliances. It's compatible
with dimmable LED, halogen, incandescent, and fluorescent bulbs.
Works with Amazon Alexa, Google Assistant. You can use the free
App--Smart Life, or voice control by Alexa and Google Assistant to
operate your devices in your home.
Specifications
Power: 120VAC, 60Hz
Item Size: 56*80*39mm
Loading : 400W
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Operating Temperature: -4° F~122° F
The plug is designed to
be angled 45 degrees,
allowing you to make
the most of your home
wall outlet.
Overloading protection is protection against overheat-
ing of the protected equipment. When the device's
temperature is high, the LED will light up in red and cut
down the power. Please power off the device and use it
When the LED is purple (AP mode), please press the
button 3 times quickly until the LED change to Sky-blue
and LED blinks--Back to EASY MODE.
NOTE: Do not plug an extension cord in this smart plug.
APP Connection
3. The smart switch can be also used with Amazon Echo and Google
Home. Please scan the QR code below and follow the instructions if
you have any trouble pairing with them.
Amazon-Echo
Use our screws
and anchor to
lock it in the
wall.(optional)
Google-Home