Control Panel - Kalorik TKG AP 2000 S Manual

CONTROL PANEL

POWER – Press the POWER button in standby mode to turn on the unit: the
last mode used (except timer and sleep modes) will start automatically.
During about 1.5 min the purifier will calibrate itself, afterwards it will display
the current state of the air (in automatic mode, adapt the filtering speed
to the conditions).
The unit will return to Standby mode by pressing this key.
Note: The safety shut-off function prevents the air purifier from switching on
when the front panel is removed and after a fall.
CHILD LOCK – This function disables all keys. The indicator light will illuminate
and the mode will remain active until deactivated via the unlock button
on the remote control.
Press and hold for 3 seconds to exit this mode.
Press and hold for 5 seconds to display the total filter usage time and the
time remaining before the filter is replaced.
IONIZER / WIFI – Will activate or deactivate the ionizing system by pressing
this key. The indicator light will turn on or off in operation.
Press and hold for 5 seconds to activate the initiate the WIFI connection.
TIMER – Press to set the operating time. Each press adds 30min, up to 12h.
The remaining time is shown on the display.
After the countdown, the unit enters Standby mode.
Press and hold for 3 seconds to exit this mode.
UV STERILIZE – Press the button to turn this feature on or off. The indicator
lights up when the function is active.
AUTO – Press this button to activate the automatic mode of the unit. The
indicator lights up when the function is active. In this mode, the volume of
filtered air automatically adjusts according to the air pollution. PM2.5<60 =
low speed, 60≤PM2.5<150 = medium speed, PM2,5≥150 = high speed.
SLEEP – The display and indicator lights turn off. The engine is idling. The timer
function is available for this mode, the unit will remain in sleep mode until
the set time has elapsed. Press any key to exit the sleep mode.
TKG AP 2000 S 10