Section 3 - Service; System Alerts - Lindsay GrowSmart Multi-Control Operation Manual

Section 3 - Service

System Alerts

All service should be performed by a Lindsay Dealer. For equipment issues or issues with the FieldNET portal /
mobile application, please contact the FieldNET support team at 866.MY.FIELD (866-693-4353) in the USA, or
email support at fieldnet@lindsay.com.
Alert
High System Flow Shutdown
Low System Flow Shutdown
High Flow Disparity Shutdown
Low Flow Disparity Shutdown
High System Pressure Shutdown
Low System Pressure Shutdown
High Temperature Shutdown
Low Temperature Shutdown
High Injector Flow Shutdown
Low Injector Flow Shutdown
High Voltage Shutdown
Low Voltage Shutdown
Wireless Switch Battery Shutdown
Wireless Switch Solar Panel Error
Wireless Switch Communication Error
Powered Off While Running Wet
High Rainfall Shutdown
High pH Shutdown
Low pH Shutdown
Hardware Shutdown
P/N 1604010 Rev D (ECN 35207)
Default Level
1- High Shutdown due to system flow exceeding the allow-
able limit.
1- High Shutdown due to system flow being lower than the
allowable limit.
1- High Shutdown due to flow disparity exceeding the allow-
able variation limit when flow is high.
1- High Shutdown due to flow disparity exceeding the allow-
able variation limit when flow is low.
1- High Shutdown due to system pressure exceeding the
allowable limit.
1- High Shutdown due to system pressure being lower than
the allowable limit.
1- High Shutdown due to system temperature exceeding
the allowable limit.
1- High Shutdown due to system temperature being lower
than the allowable limit.
1- High Shutdown due to flow through an injector exceeding
the allowable limit.
1- High Shutdown due to flow through an injector being
lower than the allowable limit.
1- High Shutdown due to system voltage exceeding system
capacity.
1- High Shutdown due to system voltage being too low for
system capacity.
1- High A wireless switch has caused a shutdown due to a
problem with the battery.
1- High A wireless switch has caused a shutdown due to a
problem with the solar panel.
1- High A wireless switch has failed to communicate with
the system after multiple attempts to contact it.
1- High The Multi-Control lost power or turned off while the
system was irrigating.
1- High Shutdown due to rainfall accumulation in the rain
bucket exceeds the programmed limit.
1- High High pH amounts detected in the water exceed the
expected limits.
1- High pH amounts in the water are lower than the lowest
programmed limit.
1- High A component failure has caused the shutdown.
3-1
Cause
Multi-Control Operation Manual
Section 3 - Service