Setting Temperature Limits For Temperature Alarm; What Happens When The Temperature Limits Are Exceeded Are Fall Below - Conrad Electronic KW-9015 Operating Instructions Manual

Setting temperature limits for temperature alarm

• Press and hold the "ALERT" (E) button for 3 seconds until a tone signal can be heard.
• With the " SINCE" (B) and/or " HISTORY" (C) button it can be toggled between indoor
and outdoor temperature display.
• Briefly press the "ALERT" (E) button as confirmation.
• The top part of the icon " " flashes ("
With the " SINCE" (B) and/or " HISTORY" (C) button you set the top temperature limit
(e.g. 25°C)
• Briefly press the "ALERT" (E) button as confirmation.
• The bottom part of the icon " " flashes ("
With the " SINCE" (B) and/or " HISTORY" (C) button you set the lower temperature limit
(e.g. 18°C)
• Briefly press the "ALERT" (E) button as confirmation. Doing this, the setting is completed.
What happens when the temperature limits are exceeded are fall below the set level?
The base station will emit a tone signal. This is repeated every minute as long as the
temperature limit is exceeded or falls below the set level.
The icon " " will furthermore flash on the display and the displayed temperature.
Briefly pressing the "SEARCH IN/OUT TEMP" (D) button stops the tone signal every minute,
however the icon " " and the displayed temperature will continue to flash.
52
...").
...").