Section 2 - Euroquatics Remote App Setup; Connecting The Euroquatics Remote App To Wifi - Gavita Euroquatics Angel A1 User Manual

Section 2 - Euroquatics Remote App Setup

Connecting the Euroquatics Remote App to WiFi

All Angel fixtures come with built in WiFi capability. This allows you to quickly configure your LED system from smart
phone (using our Euroquatics Remote app), or on a Windows or Mac computer (using our web-based interface).
Once you have your Euronet network completed, your system is in "Access Point" mode. This allows you to use
your smart phone and our free Remote App to control your lighting. Here's how:
!
Download our Remote App from the iOS App Store or the Android Play store for free by searching
•
"Euroquatics."
Open up your smart phone's WiFi settings and find the network named "Euronet" and select it as shown in
•
picture #1.
Open the Euroquatics Remote App on your phone.
•
Select the Euronet network as shown in picture #2.
•
After selecting the Euronet network, you'll be taken to the configuration/home screen.
•
Direct Connect
Picture #1
NOTE: The first time you log in the app will request the password for the system. The default password is
"Admin123" and is case sensitive!
!
If you can see the Angel system but the app wont seem to open close the app and go into network settings and
have your mobile device forget the network. Then reconnect and try again. Make sure you completely close the
app and that it's not running in the background!
First time login
Default Password
"Admin123"
2
EURONET network
Picture #2