Gavita Euroquatics Angel A1 User Manual page 14

Section 3 - Using the Web Interface
The Web Interface Settings Page (continued)
As with most settings, make sure to click save if you've made a change to the Network Name. However, the name
will not take affect on your mobile app until you power cycle* the lighting system. This is the only setting that has
this requirement.
!
"Set time" enables you to set or update the system time.
There is no "Save" required on this setting. (Setting time is
important because your lights run on a time cycle.)
"Devices in Network" reports system information on a per-unit basis. It also allows you to edit a system by
clicking "remove" on non-master devices in the network. Once you click remove, you will need to re-link the
removed device to add it back to the system. (See page 1 for more details.) Once a device is paired with the
system, it will be remembered until you remove it or take all devices in the system back to factory default.
*To power cycle the system, turn off
power or unplug the system from its
power supply.
11