Table of Contents
Advertisement
Changing the interior lighting
Handling malfunctions
YOU NOTICE THAT...
Your display does not light
up.
The bulb isn't working any-
more.
Water or steam leak
around the door during
steaming.
- Turn the view port a quarter turn to the left.
- Unscrew the bulb in the same direction.
Bulb specifications:
- 15 W
-
- 300°C
-
- Replace the bulb then reposition the view port, making sure the
joints are correctly positioned.
- Reconnect your steamer.
POSSIBLE
CAUSES
Steamer is not connected
to power source.
Electronic board is not
functioning.
The bulb is out of order.
The
steamer
connected.
Your fuse is out of order.
The door is not properly
closed.
The door seal is
defective.
The bulb is located at the back right of your
steamer's cavity.
Disconnect
before performing any task on
the bulb to avoid the risk of electric
shock.
220-240 V
E 14 cap
WHAT SHOULD YOU DO?
- Check that the appliance
is receiving electricity
(good fuse).
- Call the Service
Department.
- Change the bulb.
- Connect the steamer.
is
not
- Change the fuse.
- Call the Service
Department.
your
steamer
Advertisement
Table of Contents
