Advertisement
In power ON mode, press and hold "SET" button until you see F1 on screen. Then release "SET" button and
press "MEMORY" or "MODE" button to switch between Celsius (°C) and Fahrenheit (°F). Press "SET" button to
confirm and proceed to next function or press and release "ON/SCAN" button to exit
While in power ON or OFF mode, press and release "MEMORY" button to view the temperature stored in memory.
The low battery icon
Please open the battery cover by sliding the battery cover out.
Replace with new batteries.
The Power will be OFF automatically if not in use for approximately 18 seconds.
Please refer to the User's Guide to understand fever indication and object temperature measurement.
°C / °F SWITCH
CLEANING THE SENSOR
Clean the sensor periodically to ensure an accurate reading. Please use
a cotton swab with 70% concentrated alcohol to clean the sensor. Allow
the sensor to dry for at least 1 minute before the next measurement or
use a tissue paper to dry it.
BATTERY REPLACEMENT
on the screen indicates low battery.
ADDITIONAL FEATURES
Jitron Pte Ltd
8 Ubi Road 2, #05-01
Zervex, Singapore 408538
Tel: (65) 6748 6815
E-mail: enquiry@jitron.com
Web: www.jitron.com
MEMORY
POWER
Manufacturer:
BATTERY:
AAA 1.5V ALKALINE
Rev. 04/20
Advertisement
