To Set The Color System; Wide Screen Compatibility 16:9 - Aiwa HV-DH10 Operating Instructions Manual

Operation with Tape (Continued)

To Set the Color System

Normally the AUTO setting is sufficient. If the
playback picture color is abnormal, select the color
system of the cassette you are using.
1
Press i/SETUP and the main menu will appear.
2
Press j/l to select the SYSTEM, then press
OK/ENTER.
Pr12
P SET
REC
ACMS
R
f + -
OSD OSD
ON 16:9 DECO-
OFF 4:3 DER
3
Press i+/k– to select according to the color
system used.
AUTO
Pr-12
P SET
REC
ACMS
R
PAL
f
+ -
OSD OSD MESECAM
ON 16:9 DECO-
OFF 4:3 DER
4
Press i/SETUP to return to the normal screen.
Note
The color system setting is automatically returned to AUTO
if the cassette is ejected.
42
A B
1 2
C
TIME SYS-
OSD
DATE TEM
SYS-
TEM
NIC
OK i
OPR
A B
1 2
C
TIME SYS-
OSD
DATE TEM
SYS-
TEM
NIC
i
OPR

Wide Screen Compatibility 16:9

This unit can record and play back wide screen
aspect ratio programs (16:9). To record a wide screen
format program successfully the correct type of wide
screen signal must be broadcast by the TV station.
Note
To enjoy Wide-Screen playback you must connect the unit to
the TV using a 21-pin scart cord.
1
Press VIDEO to switch output to the VCR.
2
Press i/SETUP and the main menu will appear.
3
Press j/l to select the 16:9/4:3, then press OK/
ENTER.
Pr12
P SET
REC
ACMS
R
f
+ -
OSD OSD
ON 16:9
DECO-
OFF 4:3 DER
4
Press i+/k– to select: AUTO, 4:3 or 16:9.
AUTO: Automatically plays back Wide-Screen
programs as Wide-Screen and Normal programs
as normal.
4:3: Only for playing back and recording Normal
format recordings (4:3).
16:9: Only for playing back and recording Wide-
Screen format recordings (16:9).
Pr12
P SET
REC
ACMS
R
f + -
OSD OSD
ON 16:9
DECO-
OFF 4:3 DER
5
Press i/SETUP to return to the normal screen.
A B
1 2
C
TIME
SYS-
OSD
DATE
TEM
16:9
NIC
4:3
OK i
OPR
A B
1 2
C
TIME SYS-
AUTO OSD
DATE TEM
16:9
4:3 NIC 4:3
16:9
i
OPR