Equipment - Echo GT-225i Operator's Manual

Hide thumbs Also See for GT-225i:
Table of Contents

Advertisement

GT-225I

Equipment

Use only approved attachments. Serious injury may result from
the use of a non-approved attachment combination. ECHO
Incorporated will not be responsible for the failure of cutting
devices, attachments or accessories which have not been
tested and approved by ECHO Incorporated. Read and comply
with all safety instructions.
Do not attempt to modify this product. Serious injury can
result from the use of any modified product.
Check unit for loose or missing nuts, bolts, and screws.
Tighten or replace as needed.
Inspect shield for damage and ensure that shield is
properly installed, and that the cut-off knife is securely in
place. Replace if either is damaged or missing.
Check that the cutting attachment is firmly attached and in
safe operating condition.
Manufacturer recommended flexible non-metallic line is
installed in the trimmer head.
Assure that throttle trigger, throttle trigger lockout, and
stop switch all work properly.
Check that handle and harness (if included) are installed
and adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop before
assembling unit, removing obstructions, clearing debris,
or servicing unit.
Do not connect spark plug lead to spark plug until unit is
ready for use.
DO NOT start or operate unit unless all guards and
protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
Moving parts may not be visible through openings.
X7732274604
© 04/21 ECHO Incorporated
SAFETY
13

Advertisement

Table of Contents
loading

Table of Contents