Related Manuals for L.L.Bean All-Weather Lounger Adirondack Chair
Summary of Contents for L.L.Bean All-Weather Lounger Adirondack Chair
- Page 1 All-Weather Lounger Adirondack Chair Thank you for purchasing our All-Weather Lounger Adirondack Chair. Assembly of this product requires a 4mm Hex Key (included). We have found it helpful to have a second person present in at least one step of the assembly.
- Page 2 STEP 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. All pieces should be placed on a non-abrasive surface (like the carton or carpet) to prevent damage to the finish.
- Page 3 Step 1 Unfold chair assembly. Correct Incorrect Step 2 Thread each 1½" bolt (B),into inserts (these inserts are pre-fixed into the legs of the chair below the pin holes). Insert pins (A) into large holes.
- Page 4 Ottoman Function Extracting: -Grab the Handle and pull straight out as shown. -When fully extended reach beneath the ottoman and extend the legs -Set ottoman down (1) Pull ottoman out (2) Rotate legs outward. Set ottoman down Retracting: -Grab the Handle and start by pushing the ottoman inward slightly while in its resting position (down) -Lift the ottoman until it is parrellel with the seat (like above photo).
- Page 5 Care This material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color.