Page 1
ADIRONDACK BENCH Thank you for purchasing our Adirondack Bench. Assembly of this product requires a 7/16" wrench or adjustable wrench. Having someone assist you by holding parts in place during installation will make the process easier. 8250 0MLS6120713...
Page 2
STEP 1 Read through these instructions thoroughly. We have found this to be of great value when first assembling this product. STEP 2 Remove all parts and hardware from packing material. Place wooden parts on non-abrasive surface (like carpet or carton) to prevent damage to finish.
Page 3
STEP 5 Attach the Back Leg (C) using one 1/4" x 20 x 2" Joint Connector, one 1/4" washer and one lock nut for each side. Insert the Joint Connector through the Back Leg (C) and into the Seat Assembly (A). Place washer on end of Joint Connector and finish with lock nut.
Page 4
STEP 8 Tighten all Joint Connectors and Lag bolts completely. CARE Thank you for choosing our classic L.L.Bean Over time your Adirondack furniture will need Adirondack furniture. The natural, finished refinishing. We recommend the following: • furniture is made of solid oak and finished Lightly sand each piece with a fine grade of with a wood preservative.