Exploded Diagrams - Tiger SS11 Original Instruction Manual

13.

Exploded diagrams

SS11 Subsea Lever Hoist
For 800kg, 1.5t, 3.0t, 6t and 10t capacity units:
6.0t top and bottom hook
Part No. Part Name
S-01 Nut for Gear Cover
S-02 Gear Cover
S-03 Pinion Shaft
S-04 Pinion Shaft Washer
S-05 Gear-side Plate
S-06 New Load Sheave
S-07 Top Hook Pin*
S-08 Safety Latch Set
S-09 Top Hook Assembly
S-10 Disc Hub
S-11 Pawl Spring
S-12 Brake Pawl
S-13 Snap Ring for Pawl Pin (800kg/1.5t)
S-14 Spring Disc
S-15 Snap Ring for Pinion Shaft
S-16 Brake Cover with Handle Cover
*S-07 Top Hook Pin is fixed to the S-27 Wheel-side Plate Assembly for 800kg and 1.5t capacity units.
Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@tigerlifting.com
Part No. Part Name
S-17 Change Gear
S-18 Spring Washer
S-19 Screw for Handle
S-20 Label
S-21 Pinion Gear
S-22 Load Gear
S-23 Travelling end stop
S-25 Chain Stripper
S-26 Load Chain Guide
S-27 Wheel-side Plate Assembly
S-28 Gasket
S-29 Ratchet Gear with Brake Disc
S-30 Nut for Handle Cover
S-31 Handle Assembly
S-32 Washer
S-34 Grip Ring
10.0t top and bottom hook
Part No. Part Name
S-35 Guide Plate
S-36 Retaining Spring
S-37 Screw for Guide Plate
S-38 Switch Set for Free Wheel
S-39 Pinion Nut
S-40 Bottom Hook Assembly
S-41 Bottom Hook Pin
S-42 Nut for Pawl Spring
S-43 Spring Stand
S-44 Pushing Up Spring
S-45 Pushing Up Pin
S-46 Change Pawl
S-47 Nut for Brake Pawl Pin
S-48 Screw for Pawl Spring
S-49 Screw for Label
S-52 Chain–End-Fixing Screw (6.0t/20t)
www.tigerlifting.com
www.tigerlifting.com
Page 29 of 38
Manual Tiger SS11-PLH En 201704 v3.2