Table of Contents
Advertisement
MAINTENANCE
Cleaning the lens
If the lens becomes dirty, the sound may skip
or may not be heard. If this occurs, clean the
lens in the following manner.
To remove dust or dry particles, first use a
camera-lens blower/brush (a) to blow a few
times to loosen particles, then gently brush
the lens (b) to clean. Finish by blowing on
the lens again.
To remove fingerprints, use a cotton swab
dipped in lens cleaning solution. Wipe gently
from the center to the edge. Lens cleaning
solution is commercially available.
Notes
• Take care not to get too much solution on
the swab, which could flow into the unit and
cause damage.
• Pressing too strongly with the swab could
scratch or break the lens.
22
ENGLISH
Cleaning a disc
Before playing, wipe the disc from the center
outward with a cleaning cloth. After playing,
store the disc in its case.
Advertisement
Table of Contents
