Operability Check
After coding completion disconnect all equipment, turn off the ignition, close the
car, and let it sleep for 5 minutes. To start operability check, call up Vehicle settings,
select Locator illumination and switch function ON. Then select Exterior lighting
delayed shut-off, set delay for 15s.
Fig. 15 Locator illumination settings.
Complete darkness is required to check the operation of the headlights, we suggest
you cover light sensor in the center of the windshield near Interior Rear View Mirror.
Now you can test your new headlight's functions.
Enjoy your Enjoy your MULTIBEAM LED.
Revision–4. 19 March 2021
Operability check
Fig. 16 Exterior lighting delayed shut-off settings.
Fig. 17 Location of the light sensor.
CARSYSTEMS.COM.UA
15/16