Airlinkplus ASOHOCB Quick Installation Manual

Quick Installation Guide

Model # ASOHOCB
Section 1
1
Install Cardbus Adapter
Step 1 Turn on your computer and wait for Windows to boot up.
Step 2 Find/select an available Type II or Type III 32-bit PC Card slot
on your notebook's side or rear panel. Insert the cardbus firmly into
the card slot with the LED indicators facing up. See Fig 1.1
Ver. 2A
Package Content:
Cardbus Adapter
Driver Disk
Quick Installation Guide
Note: Windows should automatically install the driver for the
cardbus after you inserted the card. If you are prompted for
the location of the driver, please refer to Section 2 (Driver
Installation) of this Quick Installation Guide.
Step 3 Connect one end of the Ethernet cable into an available
hub/switch port and connect the other end of the cable into the
RJ-45 port of the cardbus. See Fig. 1.2
Hub/Switch
Congratulations! You have completed the installation
of the Cardbus Adapter.
Fig 1.1
Ethernet Cable
Fig 1.2