Table of Contents
Advertisement
Device Parameter
Motion sensor status
GPS status
Motion sensor sensitivity
GPS accuracy
GPS time
Tracking time
Keepalive time
Perform factory reset
Value
Enabled/Disabled
Enabled/Disabled
Lvl 1 up to Lvl 9
10 ... 60 seconds
0 ... 900 seconds
5 ... 1800 seconds
3600 ... 21600 seconds
www.zane.hu
Description
Enable to wake up sensor by
acceleration. If no movement
sensor switches to sleep mode
after "Tracking time" is
elapsed.
Start / Stop GPS
Sensitivity of accelerometer
default: Lvl 2 = very sensitive
Position average measured
over "GPS accuracy" time
Time to get stable GPS position
data. If no GPS signal is
received for "GPS time",
tracker sends message
"motion detected"
Tracking interval to send GPS
position
If no acceleration, sending
keepalive packets to gateway.
Cycle time 60 minutes by
default, max. 6 h
4
Advertisement
Table of Contents
