Commissioning; Ztrack Config Tool To Configurate The Sensor; Device Parameters - Zane zTrack Tube Operating Manual

Commissioning

Requirements

USB type A cable with micro USB, USB charger.
Before commissioning charge zTrack Tube for 1 h with USB charger.

zTrack Configuration Tool software
Download the zTrack configuration tool from
Configuration tool is available for Win10.
zTrack Config tool is a free software interface for configuring zTrack devices.
It provides a simple environment for reading and writing device settings and performing firmware
upgrade. The tool offers several features to interact with the device; in addition to firmware upgrade,
you can adjust device settings, LoRaWAN related parameters, switch between
bootloader/application, and reset the device.
zTrack tool to configurate the sensor
First Start zTrack Configuration Tool, second connect zTrack Tube to the computer. Don't touch the
link for firmware. If you confirm to change firmware ZTrack Tube changes to boot mode, and theres
still no acces to go back to configuration mode.

Device parameters

HERE
?????
www.zane.hu
3