Table of Contents
Advertisement
Quick Links
zTrack Pro LoRaWAN GPS Tracker User Guide
Introduction
zTrack Pro is a revolutionally small LoRaWAN based GPS tracking device. The
device is widely used to track pets, children, bicycles, elderly people, bags,
assets.
In case of average usage (2 hours of motion per day with 5 minutes sending
period) zTrack Pro can work for up to 2 weeks with one single charge. Charging
is done wirelessly by a Qi charger and it takes 1 hour to fully charge the device.
The zTrack Pro tracker has GPS and WiFi module (for device configurability),
an accelerometer and a temperature meter inside.
ZD0061-002
Revision: v1.0
Copyright ZANE systems Kft.
Page 1 of 10
zTrack Pro User Guide
ZD0061-002
www.ztrackmap.com
www.zane.hu
Advertisement
Table of Contents
Related Manuals for Zane zTrack Pro
Summary of Contents for Zane zTrack Pro
- Page 1 In case of average usage (2 hours of motion per day with 5 minutes sending period) zTrack Pro can work for up to 2 weeks with one single charge. Charging is done wirelessly by a Qi charger and it takes 1 hour to fully charge the device.
- Page 2 Pro User Guide Document contents Features and specification ..................... 3 Package contents ........................3 Hardware configuration ......................4 Status LED ........................4 Battery and charging ...................... 4 Device identifier ......................5 Get started with the device ....................5 Configuring the device ....................5 4.1.1...
-
Page 3: Features And Specification
• Qi Wireless Charger and microUSB cable (A) • Please note that the Qi charger is not included in the standard zTrack Pro package. You can order separately at https://zane.hu/webshop/qi- tolto/ . • zTrack Pro LoRaWAN GPS tracker (B) •... -
Page 4: Hardware Configuration
Pro User Guide Hardware configuration Status LED There is a red LED indicator on the zTrack Pro to inform you about specific events during operation. The LED positioned on the left bottom section of the device: The LED illuminates only in one color, so the different events indicated with the number... -
Page 5: Device Identifier
Pro User Guide Device identifier Every zTrack Pro is shipped with a unique 64-bit HW-EUI. This HW-EUI is engraved into the back side of the enclosure: For more information on the utilization of HW-EUI, please refer to the 4. Get started with the device section. -
Page 6: Device Settings
Pro User Guide 4.1.1 The process of configuring the device: 1. The zTrack Pro creates a WiFi access point only if it’s being put on a wireless charger. If the device detects 2 minutes of inactivity via its WiFi module, the access point will be deactivated. - Page 7 Status of the motion sensor. When enabled, the tracker will be active on detected motions and operate as intended. When the motion sensor is disabled, the tracker will only send keepalive messages. Example on the operation of zTrack Pro: GPS enabled Motion sensor enabled If the device is in “soft”...
-
Page 8: Firmware Upgrade
User Guide, available on https://zane.hu/iot. Firmware upgrade The firmware of zTrack Pro is under continuous development. You can always find the latest firmware release and release notes on https://zane.hu/iot. Firmware upgrade can be performed via WiFi using zUtility device configuration tool. -
Page 9: Revision History
Pro User Guide Revision history Date Revision Changes 2018.08.08. v1.0 Initial release of the document Copyright ZANE systems Kft. ZD0061-002 Page 9 of 10 www.ztrackmap.com Revision: v1.0 www.zane.hu... - Page 10 IoT products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on the products before placing orders. Purchasers are solely responsible for the choice, selection, and use of ZANE systems’ products. Information in this document supersedes and replaces information previously supplied in any prior versions of this document.