Table of Contents
Advertisement
Quick Links
Amplifiers
DIN Mounting Rail Min.-/Max. Value Memory Unit GM42-MAX
Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131
090215d_GM42
73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22
Technical changes, errors and misprints excepted.
1/11
info@lorenz-messtechnik.de,
www.lorenz-messtechnik.de
Advertisement
Table of Contents
Related Manuals for LORENZ MESSTECHNIK GM42-MAX
Summary of Contents for LORENZ MESSTECHNIK GM42-MAX
- Page 1 Amplifiers DIN Mounting Rail Min.-/Max. Value Memory Unit GM42-MAX Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted. 1/11 info@lorenz-messtechnik.de, www.lorenz-messtechnik.de...
-
Page 2: Table Of Contents
Product Phases Transportation Commissioning and Installation Standard Operation Maintenance and Cleaning Equipment disposal Reference Information Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted. 2/11 info@lorenz-messtechnik.de, www.lorenz-messtechnik.de... -
Page 3: Imprint / Copyright
These operating instructions do not constitute an agreed quality agreement or durability guarantee within the meaning of § 443 BGB (German Civil Code). Technical changes, errors and misprints excepted. No part of this publication may be reprinted without the written permission of Lorenz Messtechnik GmbH, Alfdorf. Important Notes / Keeping Before installing and commissioning the device, these operating instructions, and in particular the corresponding safety instructions, must be read. - Page 4 The devices do not contain any parts that require or can be serviced by the user. Repairs may only be carried out by Lorenz Messtechnik GmbH. If it can be assumed that safe operation of the device is no longer possible, it must be put out of operation immediately and secured against unintentional operation.
-
Page 5: Intended Use
Intended Use Devices from Lorenz Messtechnik GmbH are to be used exclusively for measuring tasks and the di- rectly associated control tasks. Any use beyond this is considered to be improper. The valid legal and safety regulations must be observed during measurement. The instrument is not a safety component in the sense of its intended use and it is transported and stored properly. -
Page 6: Health Protection And Safety
Preamble Product Description The GM42-MAX is a universally applicable fast min./max. value memory with a ±10V input. The slim housing shape allows space-saving installation in control cabinets on standard DIN mounting rails. The analog outputs minimum and maximum value memory of ±10V enable direct signal processing with a PLC. -
Page 7: Power Supply
Dimensions / Weight Device dimensions: L x W x H: 23 x 111 x 76 mm Weight: 0.10 kg Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted. -
Page 8: Instruction / Description Of The Operating Mode
7 and 8. In order to delete the maximum value, the control signal must be applied to terminals 9 and 8. Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted. -
Page 9: Interfaces And Connections
Caution: The device may not be connected to the power supply system, directly. The speci- fications of the supply voltage in chapter 4.2 must be considered. Cable connections: Never connect voltage levels to unoccupied pins. Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted. -
Page 10: Standard Operation
Note: The device does not contain any parts which must or can be serviced by the user. Repairs may be carried out by Lorenz Messtechnik GmbH exclusively. If assuming that safe operation of the device is no longer possible, it must be taken out of service and secured against inadvertent operation, immediately. -
Page 11: Equipment Disposal
The device must be disposed of in accordance with the applicable legal regulations - see also our „General Terms and Conditions of Delivery and Sale“ at www.lorenz-messtechnik.de. Reference Information Data sheet of the DIN Mounting Rail Min.-/Max. Value Memory Unit GM42-MAX. Lorenz Messtechnik GmbH Obere Schlossstrasse 127/129/131 090215d_GM42 73553 Alfdorf Phone +49 7172 93730-0, Fax +49 7172 93730-22 Technical changes, errors and misprints excepted.