Connecting The Accu-Chek Inform Ii Base Unit (New) - Accu-Chek Inform II Base Unit Addendum To The Operator Manual

Connecting the ACCU-CHEK Inform II Base Unit (NEW)

NOTICE
0 7765053001 (01) 2015-07 EN-USA • ACCU-CHEK Inform II Addendum to Operator's Manual
To ensure continuous safe and reliable operation, use
only the power supply unit provided for the ACCU-CHEK
Inform II Base Unit (for ordering information see page 9
of this Addendum).
1 Slide the base unit upward and remove it from the
wall mount (if in use).
2 Connect the power supply to the power input jack.
3 If you want to connect the ACCU-CHEK
Inform II Base Unit in a wired environment:
Connect the Ethernet (RJ45) cable or the USB cable
to the respective port. Use only the USB cable pro-
vided with the ACCU-CHEK Inform II Base Unit.
4 Slide the base unit back onto the wall mount (if in
use). Please note that the ACCU-CHEK Inform II
Base Unit Wall Mount fits the ACCU-CHEK Inform II
Base Unit (both old and new versions) and the
ACCU-CHEK Inform II Base Unit Light.
For details on configuring the ACCU-CHEK Inform II
Base Unit, consult your Roche representative.
7