Bosch GLM165-40 Operating/Safety Instructions Manual page 14

For real time measurements, repeatedly press button 4 until
the indicator for real time measurement appears on the display
1. Press Measure button 2 to activate laser. The laser will be
switched on and measuring will begin immediately.
Press the measuring button 2 to reactivate real time measuring
on the bottom line and the held measurement will move to the
middle line.
Press the measuring button 2 to hold the measurement on
the bottom line. The held measurement on the middle line will
continue to hold.
Press the measuring button 2 to reactivate real time measuring
on the bottom line and the previous held measurements will
move to the middle and top lines.
Press the measuring button 2 to hold the measurement on the
bottom line. The last three measurements will now be held and
displayed on the bottom, middle, and top lines.
Real time measurement automatically switches off after 5
minutes. The last measured value remains indicated at the
bottom on the display.
Length Measurement
For length measurements, repeatedly press the button 4 until
the indicator for length measurement
display 1.
Press the measuring button 2 for a new measurement on the
bottom line.
Press the measuring button 2 and the measurement from the
middle line will move to the top line and the measurement from
14
Find Quality Products Online at:
Move the measuring tool until the required
distance value is indicated in the bottom of the
display.
Press the measuring button 2 to hold the
measurement. The held measurement will
display at the bottom of the display.
To measure, press the measuring button 2. The
measurement will be shown on the bottom of
the display.
Press the measuring button 2 and the previous
measurement will move to the middle line.
GlobalTestSupply
www.
appears on the
.com
sales@GlobalTestSupply.com