Advertisement
Step 4
Click Next to accept the default destination location for the driver to be
installed in or click Browse to select the desired location.
Step 5
For Windows XP, click Continue Anyway at the Windows Logo
Compatibility screen.
For Windows 2000, click Yes at the Digital Signature screen.
Step 6
Remove the Driver & Utility CD from your CD drive and then restart your
computer.
Section 2
Install Driver
Note:
In most cases, Windows will automatically install the driver after the
computer is restarted. If the Found New Hardware Wizard appears, follow the
instructions below. The Found New Hardware Wizard will look different depending
on your operating system. Follow the on-screen instructions to complete the
installation. For Windows 98SE and ME users, you may be prompted to insert the
Windows 98SE or ME CD during the driver installation. Be sure to have your
Windows 98SE or ME CD ready.
Step 1
After the computer is restarted, insert the USB adapter into the USB port
of the computer. If there is not enough room to insert the adapter directly to the
USB port, you may use the supplied USB extension cable for more space.
Step 2
Select Install the software automatically and click Next.
Continue on Back
Continue on back...
Advertisement
