NewAir FlipShelf NWB180SS00 Owner's Manual page 12

Problem
The LED display does not
work.
Thereis an LED display
error,or the LED
displays "LO".
The buttons do not
function.
Possible Causes
The door is not properly
installed.
The seal is weak.
The shelves are out of
position.
There may be a problem
with the main control
board.
There is a problem with
the plug.
The cooling kit is no
longer working properly.
The PC Board is faulty.
The temperature control
panel may be damaged.
Solution
Check the door hinges to
make sure they are
properly installed.
Replace the seal on the
door. Replacements can
be acquired from the
manufacturer.
Make sure the shelves
slide all the way into the
unit.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.
Contact the
manufacturer.