Jabra Pro 9470 Mono Quick Start Manual page 2

Configuration:
1. Ensure the audio mode is set to "Headset/Speaker", and the DHSG
mode is enabled on your desk phone. Refer to your phone or IT support
for assistance.
2. Follow the setup instructions for your Jabra wireless headset. If the
headset base requires manual configuration, set the electronic hook
switch setting to "DHSG" and set the dial tone switch to position "A".
3. Make a call to the headset. If the volume of your voice is too loud or
quiet to the person you are calling, adjust the headset microphone
volume until you achieve the optimum level.
/supportpages/jabra-pro-9470/9470-26-904-102/faq/4428a7d3-b71c-4803-9020-
b38c440a375b
24/04/2021 11:17
Page 2 of 2