Hitachi R-WB640VRU0 Instruction Manual page 12

No frost
Hide thumbs Also See for R-WB640VRU0:
Table of Contents

Advertisement

Care and Maintenance
Ice maker
WARNING Do not touch the mechanical
parts of the automatic ice maker.
(Touching these parts might result in injury.)
Vacuum Compartment
1. Pull the vacuum box out In order to take the products stored
in vacuum box, pull the vacuum box out.
2. For the following part, clean it with a piece of cloth soaked in warm water.
Aluminum tray
Vaccum box Case
3. Assembly of Vacuum Box Case Assembly Attach Vacuum Box Case with
the core of Vacuum Box Door.
Vaccum box Case
Core
Cleaning once a month
CAUTION
If the detergent or any product other than warm water is
used for cleaning Vacuum Box gasket, there may be
effects in terms of deformation, color change or loss
vacuum property.
If Vacuum Box gasket is dropping or Vacuum Box Door
not well aligned, there may be the loss of vacuum property.
Water tank
In order to prevent grime and hard water stains
from building up, make sure to rinse the Water Tank
once a week.
1. How to open the Lid.
Grasp the Tank. To remove
the lid, use your finger to
insert pull the lid up.
Tank
2. How to Close the Lid.
Cleaning once a week
NOTICE
If the Automatic Ice Maker is not set to "Stop," the water pump may make sounds occasionally. This is not a malfunction.
Slide the lid in back-end first in the direction of the arrows to close the lid.
Replace the Water Filter when it wears out. Water Filters need replacing every 3 to 4 years.
Clean water tanks if they have not been used for 48 h;flush the water system connected to a water supply if water has not been
drawn for 5 days.
12
WARNING
Vacuum box gasket
Gasket Receiver
Cover
Water filter
Tank
Handle
When Vacuum Box gasket is dirty.
1. Disassembly of Vacuum Box gasket out off Vacuum Box Case. Facing
the Vacuum Box, twist the knob of the Vacuum Box gasket on top right
and carefully remove.
Knob
2. Wipe gently with sponge on the stain with plain water.
Vaccum box gasket
Please clean gasket track also.
3. Wipe water out with dry cloth and leave the part until it is naturally dried.
4. Assemble Vacuum Box gasket, twist the knob to align with the gasket
track, deliberately assemble.
In order to prevent grime and hard water stains from building up,
make sure to rinse the Water Filter once per week.
1. Pull the Case to remove it from the lid.
Lid
Case
Lid
Case
2. Pull the tab to remove the Water
Filter from the case.
3. Use a soft sponge to clean the Water Filter.
Do not use cleansers as this may damage the filter.
Don't use any detergent.
gasket track
Packing track
Knob
Tap

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents